>> Residential Home : Specialty Products : Structured Cable/Low Voltage Products
Floor Box Assemblies
Red Fire Alarm Boxes
Paddle Fan & Fixture Support Boxes
Structured Cable/Low Voltage Products
Range/Dryer Receptacle Box
Lampholders
Compact Fluorescent Fixtures
Paraform Siding Boxes
Structured Cable/Low Voltage Products Hide/Show Product Information

LVBOW-1 Features and Benefits
• Old work structured cable box
• Sturdy construction with “box like” strength and rigidity
• Molded thread device holes provide for secure mounting of structured cable devices and cover plates
• Eliminates the need to modify single gang outlet boxes
• Open back design for generous cable bend radius
• Holes in back section provide a means to secure the cable allowing cable accessibility later (fig. A)
• US Pat. No. 7,179,994 B2 and US Design Pat. No. D531,128 S
Installation of old work LVBOW-1 low volatage box Fig A

LVBOW-1 low voltage box installed

 LVBOW-1 Low voltage box installed with finish plate installed
LVB-1 Features and Benefits
• New work structured cable box
• Sturdy construction with “box like” strength and rigidity
• Eliminates need to modify single gang box
• Open back for generous cable bend radius
• Easy nail-on mounting design
• Holes on back provide a means to wire tie the cable allowing cable accessibility later (fig. A)
• Open back channel to store and protect cable during drywall phase (fig. B)
• US Pat. No. 7,179,994 B2 and US Design Pat. No. D531,128 S

LVB-1 low voltage box wire retention feature
fig. A

 LVB-1 low voltage box installed with cables
fig B

 LVB-1 low voltage box with finish plate installed
LVP-1/LVP-2 Features and Benefits
• Separates line and low voltage within the same electrical box
• Use LVP-1 with Allied Moulded’s deep series 2302, 3303, 4304, 5305 and 9314 fiberglass boxes
• Use LVP-2 with Allied Moulded’s Flexbox® Old Work boxes P-240OW & P 352OW
   and with SLIDERBOX® multi-gang boxes SB-2, SB-3 and SB-4
• Allows for a reduced number of wall box installations
• Fast, easy and convenient to install
• Complies with article 800.133(A)(1)(c) from 2008 NEC
• For low voltage applications in fire rated walls. Utilize the LVP-1 partition with the Allied Moulded deep series fiberglass wall boxes which carry the industry exclusive rating for reduced horizontal separation in the same stud cavity
 
Cu
In.
Vol.
 Catalog Number Component Description Outside Dimensions
 
 UPC#
85339		 Std.
Pkg.
Qty.

Std.
Pkg.
Wt.
       
D
W
H
      
Single gang, old work, structured cable box with ears and wings ----- LVBOW-1 Single gang, old work, structured cable box with ears and wings

3 1/16

2 5/16

3 11/16

 80003

24

4
Single gang, angled mid-nails, structured cable box ----- LVB-1 Single gang, angled mid-nails, structured cable box

2 3/4

2 1/4

3 3/4

 80002

48

8
Low voltage divider plate for use with P-2400W, P-3520W, SB-2, SB-3 and SB-4 LVP-2 Low voltage divider plate for use with P-2400W, P-3520W, SB-2, SB-3 and SB-4

80005

50

3
Low voltage divider plate for use with 2302, 3303, 4304, 5305 and 9314 series only LVP-1 Low voltage divider plate for use with 2302, 3303, 4304, 5305 and 9314 series only

80000

50

2
Single gang, plaster ring, 1/2" offset, structured cable bracket for steel or wood stud face mounting ----- LVPR-1 Single gang, plaster ring, 1/2" offset, structured cable bracket for steel or wood stud face mounting

1/2

4

4

 80001

50

4

Main Page | Company Profile | Employment | Products | Sitemap | Contact Us | Electrical Box | Fan Box | Outlet Box
© Copyright Allied Moulded Products, Inc. 222 N. Union St., Bryan, OH 43506. Phone: 419-636-4217